Garder ma session ouverte ?
Expiré dans 
La session est expirée
Votre session a expiré. Pour votre sécurité, VWR vous a déconnecté.
Voulez-vous vous connecter à nouveau?

L'expérience en ligne d'Avantor évolue pour mieux vous accompagner ! À compter du 4 avril 2025, nos clients seront migrés vers une nouvelle plateforme pour une expérience d'achat en ligne simplifiée.

  • Résultats des produits
  • Critères
  • Fournisseur
  • Affiner fournisseurs
    Trier par:

Votre recherche pour:

Microscopy and staining reagents


114  les résultats ont été trouvés
Microscopy and staining reagents

VWR offers a broad line of reagent droppers, diagnostic kits, and antigens and antisera, for aid in identifying a variety of microscopic organisms. The visualization of bacteria by means of staining procedures is an important tool for any microbiologist to have at their disposal, and these carefully standardized and reproducible stain reagents help to ensure accurate and easily interpretable results. Stains are also available to provide early detection of positive blood cultures by fluorescence procedures.


SearchPresentationType-HORIZONTAL
Choisissez parmi les options ci-dessous pour affiner votre recherche. Plusieurs sélections dans n'importe quel menu déroulant peuvent être effectuées. Cliquez sur OK pour mettre à jour vos résultats.
 
 
SearchResultCount:"114"
  Vue liste Recherche Easy View Vue simple
Trier par:
 
 
 
 

Fournisseur:  Merck
Description:   Neo-Clear ® is een niet-gevaarlijke alternatief voor xyleen. Het is vrijwel reukloos, compatibel met de meeste oplosmiddelen met een hoge zuiverheid en wordt gekenmerkt door een lagere verdampingssnelheid dan xyleen, waardoor het risico voor de gezondheid kleiner is.
Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   Immersion oil has been used in epifluorescent microscopy and cell identification.
Numéro de catalogue: (H2779-1L)

Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   HistoChoice® is a patented, complex mixture of agents that allow tissues to retain their structure, antigenic sites and nucleic acid sites. This formulation in non-citrus, contains no mercury, formaldehyde or glutaraldehyde.
UOM:  1 * 1 L
Numéro de catalogue: (EM0300-1KT)

Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   Spurr resin is a hydrophobic resin. It is less viscous than epon mixtures and is easier to dispense. The low viscosity of the resin contributes to its penetration in tissue, mineral and dense structures. A low viscosity of 60 cps also allows easy penetration into a variety of difficult materials.
UOM:  1 * 1 KIT
Fournisseur:  Merck
Description:   Entellan® New is een nieuw montagemedium voor dekglaasjes en is vooral geschikt voor commerciële automatische inbouwinstrumenten die werken met dekglaasjes. De viscositeit varieert tussen 250 en 600 mPas, 1,00869 heeft een klein viscositeitsbereik. Dit nauwe viscositeitsbereik verbetert en versnelt de toepassing, omdat noch de druppelsnelheid noch het volume moeten worden gereset na de eerste ronde met een nieuwe fles Entellan® New.
Numéro de catalogue: (1.08562.0050)

Fournisseur:  Merck
Description:   Aquatex is used for e.g. LEUCOGNOST stained specimens. For preservation purposes and subsequent optimal microscopy, the stained sections are normally mounted using a suitable mounting agent and covered with a cover glass.
UOM:  1 * 50 mL
Fournisseur:  Merck
Description:   Watervrije montagemedia, zoals Neo-Mount®, moeten worden gebruikt voor permanente montage en langdurige opslag van monsters. Objectglaasjes die in pathologische laboratoria worden verwerkt, moeten tot 10 jaar worden opgeslagen, waarbij de kleuringsresultaten stabiel moeten blijven en verkleuring niet acceptabel is. Neo-Mount®, watervrij montagemedium voor microscopie, is bijzonder kleurvast en wordt vervaardigd van oplosmiddelen op basis van mengsels van alifatische koolwaterstoffen. Neo-Mount® bevat een aromavrije vervanging voor xyleen en mag dus alleen worden gecombineerd met Neo-Clear®. Xyleen moet worden vermeden in de opbouwstap, aangezien dit de objectglaasjes vertroebelt en streept. Als er bovendien gedurende ongeveer 1 minuut gedehydrateerde objectglaasjes op filterpapier vóór montage worden geplaatst, kan alle overtollige Neo-Clear® worden omzeild omdat er luchtbellen onder het dekglaasje kunnen worden gevormd. Er moet aan dezelfde voorwaarde worden voldaan bij de montage van monsters met machines die dekglaasjes gebruiken; in dit gebied kan NEO-CLEAR® het efficiëntst worden verwijderd door incubatie van de objectglaasjes gedurende één minuut in een leeg rek voor objectglaasjes.
Numéro de catalogue: (O8639-4X500ML)

Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   For use with Osteo-bed bone embedding kit. Solvent for removal of plastic from sections prior to rehydration and staining. Most histochemical and immunohistochemistry staining protocols require the removal of methyl methacrylate (MMA) and rehydration of mounted sections for improved stain penetration and greater contrast.
UOM:  1 * 2.000 mL
Numéro de catalogue: (C9368-30ML)

Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   CC/mount is an aqueous based permanent mounting medium with a very high refractive index, which when applied to the stained tissue sections can store the tissue specimens permanently without the fading of the chromogens. Because of the superior refractive index of CC/mount, tissues mounted in this medium look like specimens mounted with organic based mounting media. No coverslipping is required with CC/mount. However, if coverslipping is required, dried CC/mount can be post mounted by using an organic based mounting medium. CC/mount permits the long-term storage of antigens localised using organic insoluble chromogen substrates, including AEC, DAB, Fast Red, BCIP/NBT, BCIP/INT and fluorescent dyes like FITC and phycobiliproteins. The high pH of CC/mount ensures increased stability of fluorescence intensity.
UOM:  1 * 30 mL
Numéro de catalogue: (45359-1EA-F)

Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   The Epoxy Embedding Medium Kit is a very widely used embedding medium for electron microscopy. The embedding formulation originally published by Luft (1961) is excellent for both plant and animal tissues. Due to the low viscosity of the resin, it penetrates the tissue specimen faster than Araldite and other polymers. It hardens easily and uniformly at low temperatures with the addition of dodecenylsuccinic anhydride (DDSA), methyl nadic anhydride (MNA), and the accelerator 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30). Slight shrinkage may occur during curing. This kit is useful for embedding a variety of tissues as a wide range of hardness can be obtained with this resin to suit a specific tissue type by using two different anhydride curing agents (DDSA and MNA).
UOM:  1 * 1 Un.
Numéro de catalogue: (I1161-30ML)

Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   ImmunoHistoMount™ is a permanent aqueous mounting medium designed for tissue sections and cell smears with peroxidase and alkaline phosphatase chromogens that cannot be dehydrated with organic solvents.
UOM:  1 * 30 mL
Numéro de catalogue: (P0091-6X120ML)

Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   PolyFreeze is a water-soluble support matrix and a form of embedding medium for frozen sectioning. PolyFreeze sections flawlessly at routine frozen specimen thickness of 5-6 μ and leaves no slide residue. It provides for -20 ºC cryostat sectioning in rapid set embedment. This medium freezes quickly supporting the tissue for sectioning at 3 mm and up with no cracking of the matrix at temperatures from -8 °C to -25 °C.
UOM:  1 * 720 mL
Numéro de catalogue: (1.00579.0500)

Fournisseur:  Merck
Description:   DPX new is a synthetic non aqueous mounting medium for microscopy. In its formulation, the teratogenic plasticiizer dibutyl phthalate (DBP) has been avoided, which renders the composition safer for the environment and more user friendly than the conventionally used mounting agents such as DPX.
UOM:  1 * 500 mL
Numéro de catalogue: (A3429-4L)

Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   Differentiation solution comprises acidified ethanol or isopropanol that is used to decolourise hematoxylin stain. The duration of exposure to the solution determines the degree of decolourisation. Differentiation is a crucial step in hematoxylin-eosin staining to achieve the proper colour contrast necessary for visualisation, by selectively removing excess hematoxylin from the tissue section and leaving behind the desired staining intensity.
UOM:  1 * 4 L
Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   Bouin's solution is an excellent fixative for preserving soft and delicate structures. It is prepared with saturated picric acid, formaldehyde and acetic acid.

Fournisseur:  SIGMA ALDRICH MICROSCOPY
Description:   Fluoromount™ Aqueous Mounting Medium for use with fluorescent dye-stained tissue.
UOM:  1 * 25 mL
Appel de prix
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'call est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'call est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Ces articles ne peuvent être ajoutés au Panier. Veuillez contacter votre service client ou envoyer un e-mail à vwr.be@vwr.com
Une documentation supplémentaire peut être nécessaire pour l'achat de cet article. Un représentant de VWR vous contactera si nécessaire.
Ce produit a été bloqué par votre organisation. Contacter votre service d'achat pour plus d'informations.
Le produit original n'est plus disponible. Le remplacement représenté est disponible
Les produits marqués de ce symbole ne seront bientôt plus disponibles - vente jusqu'à épuisement de stock. Des alternatives peuvent être disponibles en recherchant le code article VWR indiqué ci-dessus. Si vous avez besoin d'une assistance supplémentaire, veuillez contacter notre Service Clientèle au 016 385 011.
1 - 16  de 114
  1  2  3  4  5  6  7  8  Suivant

Ce site utilise des cookies, en provenance de VWR ou de ses partenaires, afin de collecter des informations statistiques sur votre navigation et vous proposer des contenus en accord avec vos préférences, générés en fonction de vos habitudes de navigation. En poursuivant la consultation de ce site, vous approuvez l’utilisation de ces cookies.

Pour en savoir plus, consultez notre Politique de Confidentialité..