Recherche de texte >
Gum+Rubber+Tubing
Imprimer
Votre recherche pour:
20 435 les résultats ont été trouvés
Gum+Rubber+Tubing
Numéro de catalogue:
(BOSSBS-4100R-A488)
Fournisseur:
Bioss
Description:
Functions in mitochondrial and peroxisomal division. Mediates membrane fission through oligomerization into membrane-associated tubular structures that wrap around the scission site to constrict and sever the mitochondrial membrane through a GTP hydrolysis-dependent mechanism. Through its function in mitochondrial division, ensures the survival of at least some types of postmitotic neurons, including Purkinje cells, by suppressing oxidative damage. Required for normal brain development, including that of cerebellum. Facilitates developmentally regulated apoptosis during neural tube formation. Required for a normal rate of cytochrome c release and caspase activation during apoptosis; this requirement may depend upon the cell type and the physiological apoptotic cues. Also required for mitochondrial fission during mitosis. Required for formation of endocytic vesicles. Proposed to regulate synaptic vesicle membrane dynamics through association with BCL2L1 isoform Bcl-X(L) which stimulates its GTPase activity in synaptic vesicles; the function may require its recruitment by MFF to clathrin-containing vesicles. Required for programmed necrosis execution. Isoform 1 and isoform 4 inhibit peroxisomal division when overexpressed.
UOM:
1 * 100 µl
Numéro de catalogue:
(BOSSBS-4100R-A647)
Fournisseur:
Bioss
Description:
Functions in mitochondrial and peroxisomal division. Mediates membrane fission through oligomerization into membrane-associated tubular structures that wrap around the scission site to constrict and sever the mitochondrial membrane through a GTP hydrolysis-dependent mechanism. Through its function in mitochondrial division, ensures the survival of at least some types of postmitotic neurons, including Purkinje cells, by suppressing oxidative damage. Required for normal brain development, including that of cerebellum. Facilitates developmentally regulated apoptosis during neural tube formation. Required for a normal rate of cytochrome c release and caspase activation during apoptosis; this requirement may depend upon the cell type and the physiological apoptotic cues. Also required for mitochondrial fission during mitosis. Required for formation of endocytic vesicles. Proposed to regulate synaptic vesicle membrane dynamics through association with BCL2L1 isoform Bcl-X(L) which stimulates its GTPase activity in synaptic vesicles; the function may require its recruitment by MFF to clathrin-containing vesicles. Required for programmed necrosis execution. Isoform 1 and isoform 4 inhibit peroxisomal division when overexpressed.
UOM:
1 * 100 µl
Numéro de catalogue:
(BOSSBS-4100R-HRP)
Fournisseur:
Bioss
Description:
Functions in mitochondrial and peroxisomal division. Mediates membrane fission through oligomerization into membrane-associated tubular structures that wrap around the scission site to constrict and sever the mitochondrial membrane through a GTP hydrolysis-dependent mechanism. Through its function in mitochondrial division, ensures the survival of at least some types of postmitotic neurons, including Purkinje cells, by suppressing oxidative damage. Required for normal brain development, including that of cerebellum. Facilitates developmentally regulated apoptosis during neural tube formation. Required for a normal rate of cytochrome c release and caspase activation during apoptosis; this requirement may depend upon the cell type and the physiological apoptotic cues. Also required for mitochondrial fission during mitosis. Required for formation of endocytic vesicles. Proposed to regulate synaptic vesicle membrane dynamics through association with BCL2L1 isoform Bcl-X(L) which stimulates its GTPase activity in synaptic vesicles; the function may require its recruitment by MFF to clathrin-containing vesicles. Required for programmed necrosis execution. Isoform 1 and isoform 4 inhibit peroxisomal division when overexpressed.
UOM:
1 * 100 µl
Numéro de catalogue:
(BOSSBS-12193R-A647)
Fournisseur:
Bioss
Description:
Transcription factor required for formation of positional identity in the developing retina, regionalization of the optic chiasm and morphogenesis of the kidney. Can neuralize ectodermal cells directly By similarity. Binds to the consensus sequence 5'-A[AT]T[AG]TTTGTTT-3' and acts as a transcriptional repressor. Also acts as a transcriptional activator. Promotes development of neural crest cells from neural tube progenitors. Restricts neural progenitor cells to the neural crest lineage while suppressing interneuron differentiation. Required for maintenance of pluripotent cells in the pre-implantation and peri-implantation stages of embryogenesis. Probable transcription factor involved in embryogenesis and somatogenesis. FOXD1 is involved in regulating inflammation as well as kidney and retinal development. FOXD1 regulates the activity of NFAT and NFkB. Deficiency of FOXD1 results in multiorgan systemic inflammation, exaggerated Th cell-derived cytokine production, and T cell proliferation in autogolgous MLRs. In kidneys, FOXD1 controls the production of signals required for the normal transition of induced mesenchyme into tubular epithelium and full growth and branching of the collecting system. Deletion of FOXD1 results in renal abnormalities. FOXD2 acts as a modulator of T cell activation.
UOM:
1 * 100 µl
Fournisseur:
BURKLE
Description:
These are light- and high-performance pump to transfer small quantities of watery media up to 300 mPas from canisters, barrels and narrow necked containers from 32 mm opening diameter. Laboratory pumps, with splash water protected motor 230 V/200 W (IP 44), with 1,5 m PVC-hose, PP nozzle, 2 hose clips, discharge spout, wall bracket.
Fournisseur:
DELTALAB
Description:
En polystyrène, flexible, blanc.
Numéro de catalogue:
(EDVO639)
Fournisseur:
EDVOTEK
Description:
Single rack.
UOM:
1 * 1 ST
Numéro de catalogue:
(BELAF187650001)
Fournisseur:
Bel-Art Products, a Part of SP
Description:
Fils d'acier, revêtement époxy.
UOM:
1 * 1 ST
Numéro de catalogue:
(554-1125)
Fournisseur:
JOUR RESEARCH (VICI)
Description:
Petit accessoire pratique pour le maintien de tuyau dans un solvant.
UOM:
1 * 5 ST
Fournisseur:
LABCON
Description:
PerformR® centrifuge tubes combine reliable performance in major centrifuges with spin rates higher than many popular brands. The high-quality, lab certified, non-cytotoxic medical grade resin means users don't have to compromise their work with low-quality tubes.
Fournisseur:
DWK Life Sciences
Description:
Borosilicate glass, 33 expansion, low extractable.
Fournisseur:
Bel-Art Products, a Part of SP
Description:
These microcentrifuge tube racks are made of lightweight PC and are stackable when loaded or empty. The locking clips firmly connect multiple racks together to form larger arrays that can be easily transported.
Numéro de catalogue:
(CORN1395-OR)
Fournisseur:
Corning
Description:
O-ring, silicone, PYREX®, for hybridisation tubes
UOM:
1 * 10 ST
Fournisseur:
DWK Life Sciences
Description:
Silicone, translucent or FKM (Viton), black.
Fournisseur:
WITEG LABORTECHNIK GMBH
Description:
Colour comparison cylinders according to Nessler for comparators, with optically plane bottom.
Fournisseur:
NEOLAB
Description:
Portoirs, en PP, couleurs vives (orange, jaune, vert, rose, bleu). Spécialement conçus pour tubes PCR de 0,2 ml en bandelettes.
Appel de prix
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'
 est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'
est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Ces articles ne peuvent être ajoutés au Panier. Veuillez contacter votre service client ou envoyer un e-mail à vwr.be@vwr.com
Une documentation supplémentaire peut être nécessaire pour l'achat de cet article. Un représentant de VWR vous contactera si nécessaire.
Ce produit a été bloqué par votre organisation. Contacter votre service d'achat pour plus d'informations.
Le produit original n'est plus disponible. Le remplacement représenté est disponible
Les produits marqués de ce symbole ne seront bientôt plus disponibles - vente jusqu'à épuisement de stock. Des alternatives peuvent être disponibles en recherchant le code article VWR indiqué ci-dessus. Si vous avez besoin d'une assistance supplémentaire, veuillez contacter notre Service Clientèle au 016 385 011.
|
|||||||||
Vue liste
