Recherche de texte >
Solid+Phase+Extraction
Imprimer
Votre recherche pour:
49 008 les résultats ont été trouvés
Solid+Phase+Extraction
Fournisseur:
Biotium
Description:
Cyclins, regulatory subunits, which associate with kinases, control many of the important steps in cell cycle progression. The Cdc2 protein kinase (p34Cdc2) exhibits protein kinase activity in vitro and exists in a complex with both cyclin B and a protein homologous to p13SUC1. Cdc2 kinase is the active subunit of the M phase promoting factor (MPF) and the M phase-specific Histone H1 kinase. The p34Cdc2/cyclin B complex is required for the G2 to M transition. An additional cell cycle-dependent protein kinase, termed p55cdc, exhibits a high degree of homology with the S. cerevisiae proteins Cdc20 and Cdc4. The p55cdc transcript is readily detectable in a variety of cultured cell lines in growth phase, but disappears when cell growth is chemically arrested.
Numéro de catalogue:
(BOSSBS-6385R-HRP)
Fournisseur:
Bioss
Description:
Specific growth arrest protein involved in growth suppression. Blocks entry to S phase. Prevents cycling of normal and transformed cells.
UOM:
1 * 100 µl
Numéro de catalogue:
(630-2059)
Fournisseur:
VWR Collection
Description:
Accessory for microscopes, VWR® VisiScope®, Kit de contraste de phase, complet, avec objectifs IOS W-plan (10×, 20×, 40×, 100×) et condenseur BF/DF/PH
UOM:
1 * 1 ST
Numéro de catalogue:
(TAAGTGG0008)
Fournisseur:
KREGLINGER EUROPE
Description:
One step bacterial DNA extraction kit for food, beverage, surfaces, handlers, water and environmental samples.
UOM:
1 * 96 VIA
Numéro de catalogue:
(TAAGTGG0009)
Fournisseur:
KREGLINGER EUROPE
Description:
Two steps bacterial DNA extraction kit for food, beverage, surfaces, handlers, water and environmental samples.
UOM:
1 * 1 KIT
Numéro de catalogue:
(324713-50)
Fournisseur:
Merck Millipore (Calbiochem)
Description:
Native endoproteinase Glu-C from <i>Staphylococcus aureus</i>. Serine protease that specifically hydrolyses peptide bonds at the carboxylic side of glutamic acid and aspartic acid residues. Inhibited by DFP and α2-macroglobulin. Suggested working concentration: 1:20 to 1:100 (protease:protein by weight) for sequence analysis.
UOM:
1 * 50 µG
Fournisseur:
Agilent
Description:
Handy stainless steel tools for proper column installation lengths into the most popular GC inlets.
Fournisseur:
Biotium
Description:
This antibody recognizes a 56 kDa protein, which is identified as Early Mitotic Inhibitor-1 (EMI1). It regulates mitosis by inhibiting the anaphase promoting complex/cyclosome (APC). Emi1 is a conserved F box protein containing a zinc-binding region essential for APC inhibition. The Emi1 protein functions to promote cyclin A accumulation and S phase entry in somatic cells by inhibiting the APC complex. At the G1-S transition, Emi1 is transcriptionally induced by the E2F transcription factor. Emi1 overexpression accelerates S-phase entry and can override a G1 block caused by overexpression of Cdh1 or the E2F-inhibitor p105 retinoblastoma protein (pRb). Depleting cells of Emi1 through RNA interference prevents accumulation of cyclin A and inhibits S phase entry.
Fournisseur:
Biotium
Description:
Cyclins, regulatory subunits, which associate with kinases, control many of the important steps in cell cycle progression. The Cdc2 protein kinase (p34Cdc2) exhibits protein kinase activity in vitro and exists in a complex with both cyclin B and a protein homologous to p13SUC1. Cdc2 kinase is the active subunit of the M phase promoting factor (MPF) and the M phase-specific Histone H1 kinase. The p34Cdc2/cyclin B complex is required for the G2 to M transition. An additional cell cycle-dependent protein kinase, termed p55cdc, exhibits a high degree of homology with the S. cerevisiae proteins Cdc20 and Cdc4. The p55cdc transcript is readily detectable in a variety of cultured cell lines in growth phase, but disappears when cell growth is chemically arrested.
Fournisseur:
Biotium
Description:
Cyclins, regulatory subunits, which associate with kinases, control many of the important steps in cell cycle progression. The Cdc2 protein kinase (p34Cdc2) exhibits protein kinase activity in vitro and exists in a complex with both cyclin B and a protein homologous to p13SUC1. Cdc2 kinase is the active subunit of the M phase promoting factor (MPF) and the M phase-specific Histone H1 kinase. The p34Cdc2/cyclin B complex is required for the G2 to M transition. An additional cell cycle-dependent protein kinase, termed p55cdc, exhibits a high degree of homology with the S. cerevisiae proteins Cdc20 and Cdc4. The p55cdc transcript is readily detectable in a variety of cultured cell lines in growth phase, but disappears when cell growth is chemically arrested.
Fournisseur:
Biotium
Description:
This antibody recognizes a 56 kDa protein, which is identified as Early Mitotic Inhibitor-1 (EMI1). It regulates mitosis by inhibiting the anaphase promoting complex/cyclosome (APC). Emi1 is a conserved F box protein containing a zinc-binding region essential for APC inhibition. The Emi1 protein functions to promote cyclin A accumulation and S phase entry in somatic cells by inhibiting the APC complex. At the G1-S transition, Emi1 is transcriptionally induced by the E2F transcription factor. Emi1 overexpression accelerates S-phase entry and can override a G1 block caused by overexpression of Cdh1 or the E2F-inhibitor p105 retinoblastoma protein (pRb). Depleting cells of Emi1 through RNA interference prevents accumulation of cyclin A and inhibits S phase entry.
Fournisseur:
OMEGA BIO-TEK
Description:
Le Mag-Bind® SeqDTR™ est conçu pour le retrait efficace et fiable des terminaisons non incorporées issues de la réaction de séquençage. Les produits de séquençage sont tout d'abord mélangés avec le Mag-Bind® SeqDTR™. Ensuite, l'ADN se lie de façon sélective aux particules de Mag-Bind® SeqDTR™. En deux lavages rapides, les contaminants présents sous forme de traces, comme les nucléotides, les amorces et les petits produits d'amplification non ciblés, sont supprimés.
Fournisseur:
HICHROM GAS CHROMATOGRAPHY
Description:
Apolar phase, suitable for high flm thickness columns, to analyze solvents, alcohols, volatiles, etc.
Fournisseur:
Avantor
Description:
Vydac TP was the first range of wide pore media phases developed in the Vydac range and became the industry standard for peptide and protein separations. The large pores of the 300 Å TP silica give polypeptide molecules complete access to the interior of the silica pores.
Numéro de catalogue:
(REST21642)
Fournisseur:
Restek
Description:
This puller/inserter tool has hook end for removing CarboFrit® inserts and a bent end (90°) for inserting CarboFrit® inserts.
UOM:
1 * 1 ST
Numéro de catalogue:
(REST31830)
Fournisseur:
Restek
Description:
This contains n-hexane (C6), n-decane (C10), n-docosane (C22) and n-dotriacontane (C32).
UOM:
1 * 1 Ampul
Appel de prix
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'
 est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'
est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Ces articles ne peuvent être ajoutés au Panier. Veuillez contacter votre service client ou envoyer un e-mail à vwr.be@vwr.com
Une documentation supplémentaire peut être nécessaire pour l'achat de cet article. Un représentant de VWR vous contactera si nécessaire.
Ce produit a été bloqué par votre organisation. Contacter votre service d'achat pour plus d'informations.
Le produit original n'est plus disponible. Le remplacement représenté est disponible
Les produits marqués de ce symbole ne seront bientôt plus disponibles - vente jusqu'à épuisement de stock. Des alternatives peuvent être disponibles en recherchant le code article VWR indiqué ci-dessus. Si vous avez besoin d'une assistance supplémentaire, veuillez contacter notre Service Clientèle au 016 385 011.
|
|||||||||
Vue liste
