Recherche de texte >
mycoplasma+detection
Imprimer
Votre recherche pour:
80 514 les résultats ont été trouvés
mycoplasma+detection
Numéro de catalogue:
(AATB45500)
Fournisseur:
AAT BIOQUEST INC
Description:
Power Styramide™ Signal Amplification (PSA) system is one of the most sensitive fluorescence imaging methods that can detect extremely low-abundance targets in cells and tissues with improved fluorescence signal 10-50 times higher than the commonly used tyramide (TSA) reagents.
UOM:
1 * 100 ST
New Product
Numéro de catalogue:
(AATB16876)
Fournisseur:
AAT BIOQUEST INC
Description:
AAT Bioquest's anti-mouse secondary antibodies are affinity-purified antibodies with well-characterized specificity for mouse immunoglobulins and are useful in the detection, sorting or purification of its specified target.
UOM:
1 * 1 mg
New Product
Numéro de catalogue:
(J61325.AP)
Fournisseur:
Thermo Scientific
Description:
Excellent colorimetric substrate for detection of horseradish peroxidase labelled probes and is used with peroxidase and peroxidase coupled systems, particularly in ELISA techniques, blue result.
UOM:
1 * 500 mL
Numéro de catalogue:
(AATB45310)
Fournisseur:
AAT BIOQUEST INC
Description:
Power Styramide™ Signal Amplification (PSA™) system is one of the most sensitive metH₂O₂ds that can detect extremely low-abundance targets in cells and tissues with improved fluorescence signal 10 to 50 times higher than the widely used tyramide (TSA) reagents.
UOM:
1 * 100 ST
New Product
Numéro de catalogue:
(STMC100-1396)
Fournisseur:
STEMCELL Technologies
Description:
Stimulating T cells with the HPV18 (L1) Peptide pool releases downstream cytokines and upregulates activation markers, enabling antigen-specific T cells to be detected or isolated for analysis. A lyophilised mixture of 140 peptides from major capsid protein L1 of human papillomavirus type 18 (HPV18), HPV18 (L1) Peptide pool consists of 15-mer peptides with 11-amino-acid overlaps that cover amino acids 1 to 568 on L1. L1 enters the nuclei of host cells and can assemble into virus-like particles (Stauffer <i>et al.</i>). Viral peptide pools are useful for a broad range of applications, including vaccine development, immunological research, and diagnostic assay development.
UOM:
1 * 1 PE
New Product
 Il s'agit d'un élément MarketSource. Des frais supplémentaires peuvent s'appliquer.
Numéro de catalogue:
(BSBTMA1012)
Fournisseur:
BosterBio
Description:
Mouse IgG monoclonal antibody for Catenin gamma (Plakoglobin), junction plakoglobin ( JUP) detection. Tested with WB, IHC-F, ICC in Human; chicken; rat. No cross reactivity with other proteins.
UOM:
1 * 0,1 mg
Numéro de catalogue:
(BSBTPB9245)
Fournisseur:
BosterBio
Description:
Polyclonal antibody for IL 1F4/IL18 detection. Host: Rabbit.Size: 100μg/vial. Tested applications: WB. Reactive species: Mouse. IL 1F4/IL18 information: Molecular Weight: 22135 MW; Subcellular Localization: Secreted.
UOM:
1 * 1 EA
Numéro de catalogue:
(PRSI25-206)
Fournisseur:
ProSci Inc.
Description:
YBX2 is a member of the Y box multigene family of proteins; it contains the cold shock domain that is highly conserved among all Y box proteins and four basic/aromatic islands. By Northern blotting and immunoblotting, MSY2 appears to be a germ cell-specific protein in the testis. In the ovary, MSY2 is present exclusively in diplotene-stage and mature oocytes. MSY2 is maternally inherited in the one-cell-stage embryo but is not detected in the late two-cell-stage embryo. This loss of MSY2 is coincident with the bulk degradation of maternal mRNAs in the two-cell embryo. YBX2 is a germ-cell specific member of the vertebrate Y box family of nucleic acid-binding proteins (Gu et al., 1998 [PubMed 9780336]; Tekur et al., 1999 [PubMed 10100484]).
UOM:
1 * 50 µG
Numéro de catalogue:
(BSBTPB9267)
Fournisseur:
BosterBio
Description:
Polyclonal antibody for MMP-3/MMP3 detection. Host: Rabbit.Size: 100μg/vial. Tested applications: WB. Reactive species: Human. MMP-3/MMP3 information: Molecular Weight: 53977 MW; Subcellular Localization: Secreted, extracellular space, extracellular matrix .
UOM:
1 * 1 EA
Numéro de catalogue:
(BSBTPB9174)
Fournisseur:
BosterBio
Description:
Polyclonal antibody for Decorin/DCN detection. Host: Rabbit.Size: 100μg/vial. Tested applications: IHC-P. Reactive species: Human. Decorin/DCN information: Molecular Weight: 39747 MW; Subcellular Localization: Secreted, extracellular space, extracellular matrix.
UOM:
1 * 1 EA
Numéro de catalogue:
(BSBTRP1071)
Fournisseur:
BosterBio
Description:
Polyclonal antibody for AGFG1 detection. Host: Rabbit.Size: 100μg/vial. Tested applications: WB. Reactive species: Human. AGFG1 information: Molecular Weight: 58260 MW; Subcellular Localization: Nucleus. Cytoplasmic vesicle; Tissue Specificity: Ubiquitously expressed.
UOM:
1 * 1 EA
Numéro de catalogue:
(PIER89818)
Fournisseur:
Thermo Fisher Scientific
Description:
This Biotin 3' End DNA Labelling Kit is used for tagging single-stranded DNA primers with biotin for use in non radioactive electrophoretic mobility shift assays (EMSA) and other nucleic acid detection methods.
UOM:
1 * 1 KIT
Numéro de catalogue:
(ICNA0855042)
Fournisseur:
MP Biomedicals
Description:
The IgG fraction is prepared from the specific rabbit antiserum by delipidation, ammonium sulfate fractionation and anion exchange chromatography. The resulting IgG fraction is dialyzed into 0.02M sodium phosphate, 0.14M sodium chloride, pH 7.3, adjusted to standard titer, filtered through a 0.22 µm filter, vialed and lyophilized. No preservative is added.
The total protein is measured using the Biuret procedure, with bovine albumin as a standard. Hemagglutination titer is standardized with an in-house control by measurement of agglutination end-point with 10% human red blood cells. Each IgG fraction is tested for purity at a minimum of 40 mg/ml using immunoelectrophoresis. The product is mostly rabbit IgG; no trace of albumin is detected.
UOM:
1 * 5 mL
Numéro de catalogue:
(BSBTMA1033)
Fournisseur:
BosterBio
Description:
Mouse IgG monoclonal antibody for Cyclin D1, cyclin D1 (CCND1) detection. Tested with WB, IHC-P, IHC-F, ICC in Human;mouse;rat. No cross reactivity with other proteins.
UOM:
1 * 0,1 mg
Numéro de catalogue:
(STMC100-1408)
Fournisseur:
STEMCELL Technologies
Description:
Stimulating T cells with VZV (gE) Peptide pool releases downstream cytokines and upregulates activation markers, enabling antigen-specific T cells to be detected or isolated for analysis. VZV (gE) Peptide pool is a lyophilised mixture of 153 peptides from the envelope glycoprotein E (gE) of Varicella-zoster virus (VZV; strain Dumas), and consists of 15-mer peptides with 11-amino-acid overlaps that cover amino acids 1 to 623 on gE. gE is essential for VZV replication (Mo <i>et al.</i>, 2002) and may contribute to viral pathogenesis by facilitating epithelial cell-cell contacts (Mo <i>et al.</i>, 2000). Viral peptide pools are useful for a broad range of applications, including vaccine development, immunological research, and diagnostic assay development.
UOM:
1 * 1 PE
New Product
Il s'agit d'un élément MarketSource. Des frais supplémentaires peuvent s'appliquer.
Numéro de catalogue:
(STMC100-1410)
Fournisseur:
STEMCELL Technologies
Description:
Stimulating T cells with Clostridium (Tetanus Toxin) Peptide pool releases downstream cytokines and upregulates activation markers, enabling antigen-specific T cells to be detected or isolated for analysis. Clostridium Peptide pool is a lyophilised mixture of 326 peptides from tetanus toxin of Clostridium tetani (strain Massachusetts/E88), and consists of 15-mer peptides with 11-amino-acid overlaps that cover amino acids 1 to 1315 on tetanus toxin. Tetanus toxin entry into central neurons is mediated by the synaptic vesicle-binding protein SV2 (Yeh <i>et al.</i>), where it selectively cleaves synaptobrevin (Link <i>et al.</i>; Schiavo <i>et al.</i>). Viral peptide pools are useful for a broad range of applications, including vaccine development, immunological research, and diagnostic assay development.
UOM:
1 * 1 PE
New Product
Il s'agit d'un élément MarketSource. Des frais supplémentaires peuvent s'appliquer.
Appel de prix
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'
 est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Le stock de cet article est limité mais peut être disponible dans un entrepôt proche de vous. Merci de vous assurer que vous êtes connecté sur le site afin que le stock disponible soit affiché. Si l'
est toujours affiché et vous avez besoin d'aide, s'il vous plaît appelez-nous au 016 385 011
Ces articles ne peuvent être ajoutés au Panier. Veuillez contacter votre service client ou envoyer un e-mail à vwr.be@vwr.com
Une documentation supplémentaire peut être nécessaire pour l'achat de cet article. Un représentant de VWR vous contactera si nécessaire.
Ce produit a été bloqué par votre organisation. Contacter votre service d'achat pour plus d'informations.
Le produit original n'est plus disponible. Le remplacement représenté est disponible
Les produits marqués de ce symbole ne seront bientôt plus disponibles - vente jusqu'à épuisement de stock. Des alternatives peuvent être disponibles en recherchant le code article VWR indiqué ci-dessus. Si vous avez besoin d'une assistance supplémentaire, veuillez contacter notre Service Clientèle au 016 385 011.
|
|||||||||
Vue liste
