De cuvetten zijn ontworpen met een kamer om de vorming van luchtbellen te minimaliseren.
- Flexibility as well as excellent reproducibility
- High temperature and chemical resistance thanks to quartz design
- Reduce bubble adhesion within the chamber
Connector type A; inlet/outlet tubes with ID of 1.75 mm and OD of 3.5 mm and length 8.5 ±0,5 mm
Connector B: Two screw connectors M 6×1 and FEP tubes (500 mm).
The height in the table below refers to the cell height/centre height. If no centre height is given then both heights are acceptable.